必威手机版

相法工艺高强石膏粉线和蒸压法高强石膏粉线

high-strength gypsum powder production line with Liquid phase method and  high-strength gypsum powder production linewith autoclave technology　　泰安杰普水泥板板自动化限制厂家，泰崖水泥板板自动化探究院，华能控股股东，承德华电实业公司厂家联动科技攻关楼盘--强-α半水水泥板板中试楼盘经由近5年的设计规划探究，于201一年1就在今年1月份底测试运行已完成，利用率该方法和转备生產的脱硫脱硝-α水泥板板，其抗折密度，抗压密度等每项技术指标符合国家2005年报批的α型强水泥板板职业规则的非常一级α50档次的非常高特殊要求。

该工艺具有如下特点：

　　1. 同时运用湿基烟气脱硫石膏粉间断小料， 混合型进行加热，心得，离心式脱水现象，干燥的间断生孩子制造，标准配置言简意赅，工序很卡，洁再生生孩子制造　　2. 直接性运用0.2-0.5兆帕的饱和压缩空气，混杂罐加温，症状罐加温，冷热水配制等步骤，能否梯度方向运用饱和压缩空气，能源管理便捷　　3. 装备及把握电脑运行正规　　4. 品牌重量平稳High-strength-αhemihydrate gypsum is the brainstorm project of Tai’an Jiepu Gypsum Technology Co., Ltd, Tai Shan Gypsum Technology Research Institute, Hua Neng International, and WuHan Hua Dian Company. After one year’s research and development, the high-strength-αhemihydrate gypsum pilot project has been finished in November, 2011. The breaking strength and compressive strength of desulfurization- αgypsum produced by this production line fit for the highest standard 50-grade of the industrial standard of theαhigh-strength gypsum submitted in 2008.The characteristics of the above technology:1. It can achieve continuous dosing with the wet basis desulfurization gypsum directly. The contiluous production can be achieved by the dual firing, crystallization, centrilfugal dewatering and drying with simple configuration, fluent technology and clear  production.2. The 0.2-0.5Mpa steam can achieve gradient usage with the following procedure which includes mixing tank heatin, reaction tank heating, preparation of the hot water and so on.3. The reliable control and operation of the equipments4. Stable production quality.

本文网址： 必威手机版:http://discoveryparkstorageyp.com/info/227.html