必威手机版

相法工艺高强石膏粉线和蒸压法高强石膏粉线

high-strength gypsum powder production line with Liquid phase method and  high-strength gypsum powder production linewith autoclave technology　　泰安杰普石灰膏信息技术有限制平台，泰山岩灰膏信息技术设计院，华能持股，杭州华电实业有限品牌平台整合研发的建设项目--锻造-α半水石灰膏中试的建设项目历经近12个月的研发设计，于201在一年1就在今年1月份底调测顺利完成，再生利用该技术和装置出产的脱硝-α石灰膏，其抗折刚度，抗压刚度等那项完成指标适合2007年报批的α型锻造石灰膏该质量标准化的非常一级α50极别的非常高条件。

该工艺具有如下特点：

　　1. 直接性应用湿基脱硫脱硝石膏像不断不断添加剂， 搭配进行加热，凝结，离心力过滤，太干不断不断出产，设备简明扼要，工序顺滑，洁再生出产　　2. 立即通过0.2-0.5兆帕的水汽，混合式罐电升温，反應罐电升温，热开水配制等环节，还可以均值通过水汽，能源管理高效性　　3. 机械及的控制运动信得过　　4. 服务在质量上固定High-strength-αhemihydrate gypsum is the brainstorm project of Tai’an Jiepu Gypsum Technology Co., Ltd, Tai Shan Gypsum Technology Research Institute, Hua Neng International, and WuHan Hua Dian Company. After one year’s research and development, the high-strength-αhemihydrate gypsum pilot project has been finished in November, 2011. The breaking strength and compressive strength of desulfurization- αgypsum produced by this production line fit for the highest standard 50-grade of the industrial standard of theαhigh-strength gypsum submitted in 2008.The characteristics of the above technology:1. It can achieve continuous dosing with the wet basis desulfurization gypsum directly. The contiluous production can be achieved by the dual firing, crystallization, centrilfugal dewatering and drying with simple configuration, fluent technology and clear  production.2. The 0.2-0.5Mpa steam can achieve gradient usage with the following procedure which includes mixing tank heatin, reaction tank heating, preparation of the hot water and so on.3. The reliable control and operation of the equipments4. Stable production quality.

本文网址： 必威手机版:http://discoveryparkstorageyp.com/info/106.html